063

Formoa® 063 is a high quality, solvent free, single component joint sealant with high adhesive strength, developed for sealing and bonding applications in commercial vehicle and mass transportation industries. It is easy to extrude and tool up, has high specific adhesion, does not shrink on cure and has high UV resistance.

Download Product Sheet
063
Formoa

Technical Characteristics

Base MaterialFormoa Polymer
ConsistencyThixotropic paste
Application Temperature+5°C to 35°C
Elongation at Break>480%
Tensile Strength (DIN 53504)2 MPa
Colour(s)Black, White and GreyWhite
Curing Time (*)3.5mm (at 24 hours at 20°C / 50% R.H.)
Permanently Elastic at Temperatures(*)-40°C to +120°C

(*) These values may vary depending on environmental factors such as: temperature, moisture and type of substrates.

Product

Formoa® 063 is a high quality, solvent free, single component joint sealant with high adhesive strength, developed for sealing and bonding applications in commercial vehicle and mass transportation industries. It is easy to extrude and tool up, has high specific adhesion, does not shrink on cure and has high UV resistance.

Characteristics

•High-performance mechanical properties.
•Does not contain isocyanates, silicone, solvent.
•Can be sanded after full cure.
•No bubble formation within adhesive.
•Very easy to tool and finish.
•High UV resistance.
•Minimal health and safety considerations.
•High specific adhesion.
•Excellent long term durability.
•Odourless.
•No shrinkage.
•Easy to extrude and tool up.

Applications

• Internal/external sealing and bonding applications in theautomotive, mass transportation, commercial vehicle, caravan,marine, rail and aerospace industries.
•Sealing where a tough/flexible, anti-pick joint is required.
•Bonding of interior/exterior mouldings and sheet material
• Structural bonding in vibrating constructions
• Sealing of trafficated floor joints and low movements wall joints
• Joints in high rise constructions
• Connection joints in sheet metal fabrication

Method of use

Adhesion and surfaces preparation:

Nature Clean, dry, free of dust and grease.
Priming When bonding, Formoa® Surface Activator may be used on non-porous surfaces. We recommend preliminary compatibility tests previous to application.

Application of the adhesive:

Formoa 063 can be applied by a manual or pneumatic gun onto only one part. Join the parts together within 15 minutes. When compressed, the bond line thickness should not be less than 1-2mm, in order to allow the correct curing and best performance characteristics once cured.
Onto large surfaces the adhesive can be applied in parallel lines, 20-40cm apart.

Packaging:

Colour:White, Black and Grey
Packaging:290ML Cartridge, 600ml Sausage
This image has an empty alt attribute; its file name is High-Strength-1-1024x683.jpg