Single Product Page

High-Flexibility Adhesive

Formoa® 024

Formoa 024 is a single-component MS Polymer adhesive. It is designed for applications that need a high strength, very flexibile, and low visocosity adhesive.

• Very Flexible

• Reduced Viscosity

• Durable in Robust Climates

Datasheet

290ml Cartridge

600ml Foil Pack

Overview

Formoa 024 was originally developed for use in eastern climates. The adhesive can withstand hot and humid climates and remain durable. Its strength and very high flexibility capabilities make it ideal for withstanding applications that experience lots of movement and heavy impact. The reduced viscosity means it is easier to use than some other MS polymer-based products.

Sizes available:

290ml Cartridge

600ml Foil Pack

Also available in Bulk options

Colours Available:

White and Grey

Applications

Ideal for applications that will experience robust climatic conditions such as high heat and humidity.

Semi-structural bonding applications that require an adhesive to withstand lots of movement and heavy impact.

Key features

Excellent adhesion

Quick build-up of end strength

High performance mechanical properties

Does not contain isocyanates, silicone or solvents

Can be sanded after full cure

Flexible elastic rubber, movement accommodation up to 20%

Can be sanded after full cure

Does not contain isocyanates, silicone or solvents

How to use

Application Temperature

Between 1℃ and 30℃
(Lower temperatures will increase thickness)

Surface preparation

Clean surface to remove grease and contamination. Then apply Formoa surface activator prior to bonding and allow 10 minutes to flash off.

Application

Method will depend on foil pack or cartridge use. If unsure on the correct method of application, follow your company's SOP or watch the 'How-To' video in the media section below.

Tooling/Removal

Use an approved soapy solution before the skin over time.

Media

Faq's

Formoa 024 typically takes 2-4 hours to reach handling strength and up to 72 hours to reach full strength. While Formoa adhesives and sealants are designed to cure efficiently under various conditions, high humidity can accelerate the curing process, and colder temperatures might slow it down. Always refer to the specific product datasheet for precise curing times under different conditions. Read more about what affects adhesive cure time here.

Absolutely. Formoa 024 has excellent UV and weather resistance, making it ideal for both interior and exterior uses. The non-shrinking and non-yellowing properties ensure a clean and durable finish over time.

MS polymer adhesive stands for ""Modified Silane polymer adhesive."" It's a hybrid adhesive and sealant technology that combines the best features of both polyurethane (PU) and silicone sealants. MS polymer products are free from solvents, isocyanates, and acids, which makes them safe to use, environmentally friendly, and reduces the risk of shrinkage after curing.

Our Formoa adhesives and sealants typically have a shelf life of 12 months when stored in a cool, dry place. However, always check the product label or datasheet for specific details.

Yes, once fully cured, Formoa adhesives can be painted over with standard paints. It's always a good practice to test a small area first to ensure compatibility.

290ml Cartridge

600ml Foil Pack