Formoa® 069LT is a high-quality single component adhesive for bonding and sealing metals, composites and plastics used in the construction of mass transportation vehicles. Based on MOA technology it is chemically neutral and fully elastic. Once fully cured a tough flexible bond is achieved.

Download Product Sheet

Technical Characteristics

Base MaterialFormoa Polymer
ConsistencyThixotropic paste
Application Temperature+5°C to 35°C
Elongation at Break>500%
Tensile Strength (DIN 53504)2.5 MPa
Curing Time (*)3mm (at 24 hours at 20°C / 50% R.H.)
Permanently Elastic at Temperatures(*)-40°C to +120°C

(*) These values may vary depending on environmental factors such as: temperature, moisture and type of substrates.


Formoa® 069LT is a high quality, single component, primerless glass bonding adhesive with high adhesive strength and excellent long term durability. It is easy to extrude and tool up and has fast through cure.


•High-performance mechanical properties.
•Does not contain isocyanates, silicone, solvent.
•Can be sanded after full cure.
•No bubble formation within adhesive.
•Very easy to tool and finish.
•High UV resistance.
•Minimal health and safety considerations.
•High specific adhesion.
•Excellent long term durability.
•No shrinkage.
•Easy to extrude and tool up.


•For use in glass bonding applications in the bus, coach, automotive, rail and leisure vehicle industries.
•Backfilling/sealing between glass and body side.
•Structural elastic bonding between metal, composite, painted surfaces, and many plastics (not PE, PP or Teflon).

Method of use

Adhesion and surfaces preparation:

Nature Clean, dry, free of dust and grease.
Preparation Clean with Formoa® Surface Activator
(bodyside and glass).
Priming Where no ceramic frit protector layer exists, use Formoa® Primer PG. We recommend preliminary compatibility tests previous to application.

Application of the adhesive:

Formoa 069LT can be applied by a manual or pneumatic gun onto only one part. Join the parts together within 30 minutes. When compressed, the bond line thickness should not be less than 1-2mm, in order to allow the correct curing and best performance characteristics once cured.
Onto large surfaces the adhesive can be applied in parallel lines, 20-40cm apart.


Packaging:600ml Sausage
This image has an empty alt attribute; its file name is High-Strength-1-1024x683.jpg
Formoa 069LT 600Ml Sausage

Shelf Life:

12 months from the date of manufacture if sealant is kept in a dry storage place at a temperature ranging from +5°C to +25°C.

Health and safety recommendations

  • As with all chemical produce avoid contact with skin and eyes
  • Apply the usual industrial hygiene
  • Wear protective gloves
  • Consult the label for more information