Formoa
High Strength
024
Formoa® 024 is a very high performance hybrid polymer adhesive engineered for commercial vehicle and mass transportation applications.
It has high bond strength, very high flexibility, and low viscosity
017 LT
Formoa® 017LT is a high-quality single component adhesive sealant with medium to high viscosity and high adhesive strength.
It has an extended open time for use
on larger surface areas and in higher
heat / humidity environments
017 FE
Formoa® 017 FE is a very high performance MS Polymer adhesive. We engineered it for semi-structural bonding where a high degree of flexibility is required.
It is popular in a range of industries including Commercial Vehicle, Mass Transportation, and Marine.
095
Formoa® 095 is a very high performance hybrid polymer adhesive for bonding applications in commercial vehicle and mass transport industries where a tough, elastic structural bond is required.
It has high bond strength, high initial tack / grab and fast strength build up
Bond/Seal
064
Formoa® 064 SW+ is a high quality, solvent free, single component joint sealant with high adhesive strength – developed specifically for sealing and bonding applications in refrigerated vehicle construction.
It contains an active fungicide to inhibit mould growth (tested to ISO 846B), is easy to extrude and tool up, has fast skin time and has high UV resistance / non-yellowing properties.
066
Formoa® 066 White is a high quality, solvent free, single component adhesive / sealant developed for bonding and sealing applications in commercial vehicle and mass transportation industries.
It has high bond strength, high specific adhesion, does not shrink on cure and has high UV resistance.
207i
Formoa® 207i is a high quality, solvent free, single component joint sealant with high adhesive strength, developed for sealing and bonding applications in commercial vehicle and mass transportation industries
It is easy to extrude and tool up, has high specific adhesion, does not shrink on cure and has high UV resistance.
Glass Bonding
055
Formoa® 055 is a high-quality single component, primerless glass bonding adhesive with high adhesive strength and excellent long-term durability.
It has fast skin time and rapid strength build up
Screen
Formoa® Screen is a high quality, single component, primerless glass bonding adhesive with high adhesive strength and excellent long term durability.
It is easy to extrude and tool up and has fast through cure.
SE2
Formoa® Screen Extra 2 is a high performance adhesive for primerless bonding of windscreens and side glass in mass transit vehicles.
It has very high initial tack and green strength and rapid strength build up.
Seal/Bond
760
Formoa® 760 is a very high quality hybrid polymer based seam-sealant that can be beaded or sprayed.
Once cured it will provide a very tough and flexible coating for underbody and chassis protection – helping to prevent water ingress.
Crystal
Formoa® 006 Crystal is a very high performance crystal clear joint sealant, based on hybrid polymer technology.
It is silicone and solvent free and is very easy to extrude and tool up.
063
Formoa® 063 is a high quality, solvent free, single component joint sealant with high adhesive strength, developed for sealing and bonding applications in commercial vehicle and mass transportation industries.
Colours
010
Formoa® 010 Colours is a high quality, solvent free single component joint sealant with high adhesive strength, available in over 200 colours.
Primers
Sa
Formoa® Surface Activator is a cleaner adhesion promoter that can be used with all Formoa adhesives to increase adhesion and durability.
For use on non-porous substrates such as metals, glass and composites.
Pg
Formoa® PG (one-component) is a black primer specifically for treating glass with no ceramic frit coating.
Applied before Formoa 055, Formoa Screen and Formoa SE2, it gives a protective film against UV rays on the bonding surface between the adhesive and the glass
Pp
Formoa® Primer Pp is used to improve the surface energy of rigid or elastomeric low surface energy plastics such as, polypropylene, foamed TPE, acrylics and ABS.
Aerok
One Component Structural Adhesives and fillers
Two-Component Structural Adhesives
8010
Aerok® 8010 is a two component fast curing epoxy-mercaptan based system that has a fast working time and fixture time of 25 minutes.
When cured it forms a clear strong bond between most metals, plastics and composite.
8020
Aerok® 8020 is a structural adhesive with excellent adhesion to a wide variety of metallic and composite substrates.
It is a two part epoxy system featuring the highest quality raw materials to bring excellent adhesion and impact resistance together with time efficient cure speeds, even at room temperature.
Two-Component Structural Fillers and Adhesives
9150
Aerok® 9150 is a two component low density void and edge filler based on modified epoxy technology.
Designed as a cartridge applied product it offers excellent workability and adheres well to aluminium alloys and composite materials and has excellent long term durability and FST performance, meeting requirements of ABD 0031 and FAR/JAR 25.853.
Aerok cost - epoxy adhesives
Aerok is our range of epoxy structural adhesives and void fillers.
Aerok adhesives will cost up to £30 per 100ml
Purok
Structural Adhesives
Purok® VX 60 is a rigid acrylic structural adhesive.
It is two-component and comes in a 1:1 mix ratio.
There are two variations of Purok VX60; VX60-15 / VX60-35
VX 61
Purok® VX 61 is an impact-resistant structural acrylic adhesive.
It is two-component and can comes in a 10:1 mix ratio.
There are two variations of Purok VX 61; VX 61-15 / VX 61-40
VX 70
Purok® VX 70 is an acrylic structural adhesive.
It is two-component and can come in two varying cure speeds;
VX 70-15 - Fixture Time of 15-20 minutes
VX 70-40 - Fixture Time of 40-50 minutes
Specialist Adhesives
Purok® VX 65 is a two component hybrid toughened structural methacrylate adhesive for bonding a wide range of solid surface materials, quartz, granite natural stone, plastics and composites.
VX 67
Purok® VX 67 is a two component hybrid toughened structural methacrylate adhesive for bonding a wide range of solid surface materials, quartz, granite,natural stone, plastics and composites.
VX 90
Purok® VX 90 is an acrylic structural adhesive. It is designed for bonding Low Surface energy plastics like polypropylene, polyethylene, and thermoplastic elastomers.
Pyrok
Structural Adhesives
804
Pyrok® 804 is a flexible two-component structural polyurethane adhesive, that shows excellent adhesion to metals, plastics and composites.
For multipurpose use in applications that require a level of flexibility
805
Pyrok® 805-FR is a flexible 2-component fire retardant adhesive that shows excellent adhesion to metals, plastics, and composites.
For multipurpose use in applications that require a level of flexibility and reaction to fire performance.
Contact Adhesives
Pyrok® 9142 is a single component polyurethane contact adhesive developed for bonding fabric, upholstery, and flooring.
It is heat reactive and non-tacky meaning you can bond difficult shapes and structures. The product is formulated to have good fire, smoke and toxicity performance.
